AIoT Cloud Forum

After installed the AIC IoT Studio, the windows stat menu will have a AIC IoT Studio folder and the open the folder will have 5 items:

• IoT Studio Builder
• IoT Studio Cert
• IoT Studio Remote
• IoT Studio Utility
• User Manual

For the beginner suggest to see the User Manual to get the basic full picture about AIC IoT Studio.

The AIC IoT Studio Use is very simple just follow the below steps.

1. Click the IoT Studio Utility item in menu, do the login (password is 0000 in default)

   

   login.PNG (2.35 KiB) Viewed 4136 times

2. Open the IoT Studio Utility like below:

   

   Utility.1.png (17.72 KiB) Viewed 4136 times

3. Check the Status in the Development Mode Status block.
   If Status is Running means the AIC IoT Studio is on working.
   If Status is Stopped means the AIC IoT Studio is no working.
   So if Status is Stopped please click the Start button let AIC IoT Studio working.

   

   IoT Studio Running.PNG (19.57 KiB) Viewed 4136 times

4. When Status is Running, you can see the URL will be like http://127.0.0.1:10200.
   Move mouse cursor to URL, press right button will show Copy button let you copy URL.

   

   copy url.PNG (18.03 KiB) Viewed 4136 times

5. Open one Browser Chrome or Edge paste the URL to Brower url input.

   

   browser.PNG (28.86 KiB) Viewed 4136 times

6. Press ENTER in keyboard, the Brower will connect to AIC IoT Studio Server open login dialog. Login username:admin password:admin by default.

   

   IoT Studio login.PNG (33.2 KiB) Viewed 4136 times

7. When loign AIC IoT Studio, the AIC IoT Studio Main screen will show up like below.

   

   IoT Studio main.PNG (48.75 KiB) Viewed 4136 times

Till here, you can use AIC IoT Studio do what you want flow in later.

Best Regards
IoT Studio Support Team